Firmware Upgrade; Restore A Configuration File; Figure 91 Firmware Upgrade - ZyXEL Communications GS-2724 User Manual

Chapter 28 Maintenance
Table 65 Maintenance (continued)
LABEL
Save
Configuratio
n
Reboot
System

28.2 Firmware Upgrade

Make sure you have downloaded (and unzipped) the correct model firmware and version to
your computer before uploading to the device.
Be sure to upload the correct model firmware as uploading the wrong model
firmware may damage your device.
From the Maintenance screen, display the Firmware Upgrade screen as shown next.

Figure 91 Firmware Upgrade

Type the path and file name of the firmware file you wish to upload to the Switch in the File
Path text box or click Browse to locate it. After you have specified the file, click Upgrade.
After the firmware upgrade process is complete, see the System Info screen to verify your
current firmware version number.

28.3 Restore a Configuration File

Restore a previously saved configuration from your computer to the Switch using the Restore
Configuration screen.
188
DESCRIPTION
Click Config 1 to save the current configuration settings to Configuration 1 on the
Switch.
Click Config 2 to save the current configuration settings to Configuration 2 on the
Switch.
Click Config 1 to reboot the system and load Configuration 1 on the Switch.
Click Config 2 to reboot the system and load Configuration 2 on the Switch.
Note: Make sure to click the Save button in any screen to save your
settings to the current configuration on the Switch.
GS-2724 User's Guide