General Configuration Mode; Table 90 Command Summary: Configuration Mode - ZyXEL Communications GS-2724 User Manual

Chapter 38 Introducing Commands
Table 89 Command Summary: Enable Mode (continued)
COMMAND
vlan-stacking
vlan1q
ssh <1|2>
<[user@]dest-ip>
traceroute <ip|host-name>
[in-band|out-of-
band|vlan <vlan-
id>][ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
help
write memory

38.11.3 General Configuration Mode

The following table lists the commands in Configuration (or Config) mode.

Table 90 Command Summary: Configuration Mode

COMMAND
admin- <pw-string>
password <confirm-string>
bandwidth-
control
bcp-
transparenc
y
242
DESCRIPTION
Displays the status of the
<vlan-id>
specified VLAN.
Displays VLAN stacking settings.
Displays GVRP settings.
gvrp
Displays port isolation settings.
port-isolation
Connects to an SSH server with
the specified SSH version.
Connects to an SSH server with
[command </>]
the specified SSH version and
addition commands to be
executed on the server.
Determines the path a packet
takes to a device.
Displays help information for this
command.
Saves current configuration to the
configuration file the Switch is
currently using.
Saves current configuration to the
<index>
specified configuration file on the
Switch.
DESCRIPTION
Changes the administrator
password.
Enables bandwidth control.
Enables Bridge Control Protocol
(BCP) transparency.
PRIVILEG
E
13
13
13
13
13
13
13
13
13
13
PRIVILEG
E
14
13
13
GS-2724 User's Guide