Table of Contents
Advertisement
Chapter 8 VLAN
Figure 34 Static VLAN
The following table describes the related labels in this screen.
Table 16 Static VLAN
LABEL
ACTIVE
Name
VLAN Group ID
Port
*
Control
Tagging
90
DESCRIPTION
Select this check box to activate the VLAN settings.
Enter a descriptive name for the VLAN group for identification purposes.
Enter the VLAN ID for this static entry; the valid range is between 1 and 4094.
The port number identifies the port you are configuring.
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this
row first to set the common settings and then make adjustments on a port-by-port
basis.
Note: Changes in this row are copied to all the ports as soon as you
make them.
Select Normal for the port to dynamically join this VLAN group using GVRP. This is
the default selection.
Select Fixed for the port to be a permanent member of this VLAN group.
Select Forbidden if you want to prohibit the port from joining this VLAN group.
Select TX Tagging if you want the port to tag all outgoing frames transmitted with
this VLAN Group ID.
GS-2724 User's Guide
Advertisement
Table of Contents
Troubleshooting
