Table 58 Igmp - ZyXEL Communications GS-2724 User Manual

Chapter 25 IGMP
The following table describes the labels in this screen.

Table 58 IGMP

LABEL
Active
Index
Network
Version
Apply
Cancel
172
DESCRIPTION
Select this check box to enable IGMP on the Switch.
Note: You cannot enable both IGMP snooping and IGMP at the same
time. Refer to the section on IGMP snooping.
This field displays an index number of an entry.
This field displays the IP domain configured on the Switch.
Refer to Section 7.6 on page 78
Select an IGMP version from the drop-down list box. Choices are IGMP-v1, IGMP-v2,
IGMP-v3 and None.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Click Cancel to begin configuring the fields again.
for more information on configuring IP domains.
GS-2724 User's Guide