ZyXEL Communications GS-2724 User Manual page 238

Chapter 38 Introducing Commands
Table 89 Command Summary: Enable Mode (continued)
COMMAND
running-config
interface port-
channel <port>
<port-list>
tftp
disable
enable
erase running-config
exit
help
history
igmp-flush
kick tcp <Session ID>
logout
mac-flush
<port-num>
no logging
ping
<IP|host-
name>
[vlan <vlan-
id>][..]
reload config <index>
show classifier
cluster
238
DESCRIPTION
Copies the specified attributes
[bandwidth-limit
from one port to other ports.
....]
Restores configuration with the
config <index>
specified filename from the
<ip> <remote-
specified TFTP server to the
file>
specified configuration file on the
router.
Restores firmware via TFTP.
flash <ip>
<remote-file>
Exits Enable (or privileged) mode.
Accesses Enable (or privileged)
mode.
Resets to the factory default
settings.
Resets to the factory default
interface port-
settings on a per port basis and
channel <port-
optionally on a per feature
list> [bandwidth-
configuration basis.
limit...]
Exits Enable (or privileged) mode. 13
Displays help information.
Displays a list of command(s) that
you have previously executed.
Removes all IGMP information.
Disconnects the specified TCP
session.
Exits Enable (or privileged) mode. 13
Clears the MAC address table.
Removes all learned MAC
address on the specified port(s).
Disables syslog logging.
Sends Ping request to an Ethernet
device.
Sends Ping request to an Ethernet
device in the specified VLAN(s).
Restarts the system and use the
specified configuration file.
Displays all classifier related
information.
Displays the specified classifier
[name]
related information.
Displays cluster management
status.
PRIVILEG
E
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
GS-2724 User's Guide