C
H A P T E R
This chapter describes some commands which you can perform in the User and Enable modes.
39.1 Overview
The following command examples show how you can use User and Enable modes to diagnose
and manage your Switch.
39.2 show Commands
These are the commonly used
39.2.1 show system-information
Syntax:
show system-information
This command shows the general system information (such as the firmware version and
system up time).
An example is shown next.
sysname# show system-info
System Name
System Contact
System Location
Ethernet Address
ZyNOS F/W Version
RomRasSize
System up Time
Bootbase Version
ZyNOS CODE
Product Model
GS-2724 User's Guide
User and Enable Mode
commands.
show
: GS-2724
:
:
: 00:19:cb:00:11:fa
: V3.70(AYC.0)b0 | 03/08/2007
: 2721784
:
94:49:25 (208e20f ticks)
: V3.1 | 03/08/2007
: RAS Mar
8 2007 11:23:31
: GS-2724
39
Commands
263