Polycom Pano Administrator's Manual page 72

5. Connect the other end of the HDMI cable to an output port on the splitter or adapter, depending on
your setup method.
6. Open a browser and enter the IP address of the Pano system.
7. Go to General Settings > Pairing.
8. Enter the IP Address, Admin User Name, and Admin User Password that are associated with
the Polycom video system. (If no password is set, leave the password field blank.)
9. Select Connect, then select Pair.
The Pair button displays only when the connection is successful.
10. In the Pair with RealPresence Group Series panel, do the following and select Update to save
your settings:
a. Optional: Change the name of the video input.
b. Select the RealPresence Group Series HDMI Out is Connected to Pano checkbox if you
have connected the Polycom video system.
If you see an error message indicating that the Pano system Input port is not connected, ignore it
for now.
11. Connect one end of an HDMI cable to the Monitor 2 port on the Polycom video system.
12. Connect the other end of the HDMI cable to the Pano system HDMI Input port.
13. Test that content sharing functions properly.
Polycom, Inc.
Integrating with a Polycom Video System
70