Edit Or Delete A Registered Device - Polycom Pano Administrator's Manual

Registered Device Information
Device Information Description
Status Icon that indicates the registration status of the device:
▪
▪
Device Name Device name
Type Device type
▪
IP Address Device IPv4 address
Tip:
Room Name Room name of the Polycom Pano device.
Software Version Device software version
Serial Number Device serial number
You can click Refresh to refresh all the device information manually.

Edit or Delete a Registered Device

You can edit or delete a registered device from Device Management.
Procedure
1. In the Polycom Cloud Service Administration portal, go to Device Management.
2. Click the device name that you want to edit.
When you click the device name, additional device information displays in a configuration tab and
you can edit part of the properties.
Editable Device Properties
Properties
Device Name
Room
Security Code
Required
Polycom, Inc.
(Online) — Indicates that the device is currently connected to the Polycom Cloud
Service
(Offline) — Indicates that the device has been disconnected from the Polycom
Cloud Service
Pano
Clicking on the address of the Polycom Pano device establishes a web UI
session (a separate tab in your browser) to the Polycom Pano device.
Description
Can contain any Unicode string up to 40 characters
Can contain any Unicode string up to 40 characters
Controls whether a security code is required to connect to the Polycom Pano
device
Polycom Cloud Service
57