Disable The Security Code; Wireless Communication Options; Wireless Bands For Miracast-Certified Devices; Enable Wireless Settings - Polycom Pano Administrator's Manual

Procedure
1. In the system web interface, go to Security > Local Accounts.
2. Change your credentials (username or password) and select Save.

Disable the Security Code

The security code on the Pano system home screen is enabled by default.
The way you can can disable the code varies depending on the system setup. For example, if the system
is registered and connected to the Polycom Cloud Service, the option to disable the security code is read-
only in the system web interface.
Procedure
1. Do one of the following to disable the security code:
▪ In the system web interface, go to Security > Security Code and select Enable Security
Code to clear the checkbox.
▪ Edit the system settings in the Polycom Cloud Service Administration portal.
▪ Update the provisioning profile for the system in RealPresence Resource Manager.

Wireless Communication Options

The Pano system Wi-Fi and Bluetooth wireless communication hardware allow the Pano App and AirPlay-
and Miracast-certified devices to detect Pano systems on the network. You can enable or disable these
features as needed.
The animations that display on the Pano system home screen correspond to the system settings for
wireless communication and screen mirroring.
Note: The Pano system does not support wireless LAN (WLAN). It cannot make direct Wi-Fi
connections to external access points.

Wireless Bands for Miracast-Certified Devices

Miracast-certified devices require the 2.4 GHz band for negotiating a connection to the Pano system,
using one of three 802.11 channels (1, 6, or 11) that do not overlap. Once a connection is established, a
device that supports the 5 GHz band could choose that frequency instead to avoid interference.

Enable Wireless Settings

You can enable the wireless communication features so users can share content from Miracast- and
AirPlay-certified devices.
Note: Enabling a wireless communication feature does not automatically turn it on. You must also
enable screen mirroring.
Polycom, Inc.
Security
34