View Certificates; Delete Certificates; Change Local Account Credentials - Polycom Pano Administrator's Manual

Procedure
1. In the system web interface, go to Security > Certificates.
2. Select Install Certificate to browse for the CA-signed certificate you want to install and select
Open.
The Pano system accepts the following certificate file formats: .pem, .der, and PKCS #7 (which
typically has a .p7b filename extension).
The system checks the certificate data and, if the upload is successful, adds it to the page.
With your CA-signed certificate installed, your system is trusted by its network peers (provided that a root
certificate has established a chain of trust). This allows you to, for example, navigate with your browser
over a secure connection to the Pano system web interface and perform administrative tasks.

View Certificates

User-installed certificates are listed in the Pano system web interface, where you also can view the
contents of those certificates.
Procedure
1. In the system web interface, go to Security > Certificates.
The Certificates page lists your user-installed certificates. It includes information about which
entity a certificate is issued to, who issued it, when it expires, and the certificate type (server,
client, or CA).
2. To view the contents of a certificate, select the
The certificate contents display in plain text.

Delete Certificates

You can remove user-installed certificates on your Pano system from the web interface.
When all these certificates are deleted, your system reverts to using the factory-installed certificate. (Note:
Deleting system settings by default retains your user-installed certificates, but performing a factory reset
removes these certificates.)
Procedure
1. In the system web interface, go to Security > Certificates.
2. Locate the certificate you want to delete and select the
Deleting user-installed certificates cannot be undone.
3. Confirm by selecting Delete.
A message indicates that the certificate was deleted.

Change Local Account Credentials

The Pano system administrator ID and password you created while running the setup wizard can be
changed.
Polycom, Inc.
eye icon in the same row.
trash icon in the same row.
Security
33