Setup Wizard; Modes Of Operation; Change System Default Credentials - Polycom Pano Administrator's Manual

Wireless presentation system
Hide thumbs Also See for Pano:
Table of Contents

Advertisement

Setup Wizard

Topics:

Modes of Operation

Change System Default Credentials

Set Up System Manually
Provision the System
The setup wizard, also known as the out-of-box (OOB) state, walks you through the initial steps of
configuring your Pano system. It is available during initial setup, after a system reset with settings
deleted, and after a factory reset.
Note: Make sure you complete the entire setup process. A timeout occurs after 10 minutes and the
system returns to the sign-in page.
Modes of Operation
When you run the Pano system setup wizard, you have the following options:
Manual Setup You bypass registering with the provisioning service and configure a standalone
system. In this mode, you can control system operations manually.
Provision You register your system with a provisioning service (e.g., Polycom
Resource Manager). In this mode, some system operations (such as configuration settings and
software updates) are automatically controlled.
During either setup, you also can register your system to the Polycom Cloud Service to automatically
control some system operations (such as software updates). (Registration requires that your organization
first complete the Polycom Cloud Service activation process.)
Related Links
Register with Polycom Cloud Service
Change System Default Credentials
When you run the setup wizard, you are required to change your system's default password.
Before you begin, make sure that the monitor and network cables are connected and the power source is
plugged in. A URL displays on the monitor once the Pano system is on.
Procedure
1. Open a browser and enter the system IP address using the format https://10.11.12.13.
2. Change your system's default password.
A new password is required to limit access to the system administrator settings. The default
password, which is case sensitive, is the last six characters of your Pano system serial number.
Polycom, Inc.
on page 18
®
®
RealPresence
15

Advertisement

Table of Contents
loading

Table of Contents