Connecting A Polycom Video System Using Two Monitors; Direct Connection Setup - Polycom Pano Administrator's Manual

Connecting a Polycom Video System Using Two
Monitors
You can pair a Pano system with a Polycom video system using two monitors.

Direct Connection Setup

You can directly connect your Pano system to a Polycom video system using two monitors.
Remember the following about this setup:
▪ Monitor 1 shows near and far video.
▪ Monitor 2 shows near and far content (only if the Pano system is in a session).
▪ Annotations made to far content cannot be seen by far-end participants.
▪ Users can connect their device (such as a laptop) to the Pano system using HDMI to share content.
The following diagram illustrates how the components for this setup are connected:
Direct Connection with Two Monitors Setup
Complete the Two-Monitor Setup (Direct Connection)
The following instructions describe how to directly connect your Pano system, Polycom video system, and
two monitors.
Procedure
1. Make sure that the Pano system is running the latest software.
Polycom, Inc.
Integrating with a Polycom Video System
64