Provisioning Service; Enable A Provisioning Service - Polycom Pano Administrator's Manual

Provisioning Service

Topics:
▪

Enable a Provisioning Service

▪ Configure a Provisioning Service
▪ Disable a Provisioning Service
If your organization has Polycom
with your Pano systems:
▪ Automatically provision settings, including Room Name, Device Name, and whether a security code
is required for connecting to the system.
▪ Automatically update software.
▪ Allow your systems to register with the Polycom Cloud Service.
▪ Monitor your systems.
Remember the following about using RealPresence Resource Manager with the Pano system:
▪ Configuration settings that are provisioned or dependent on provisioned values are read-only on the
system.
▪ The system automatically checks for and runs software updates every time it restarts and at an
interval set by the service.
▪ The provisioning service can determine whether the system can register with and receive software
updates from the Polycom Cloud Service.
▪ With administrative permissions, you can change a system's settings after a bundle is applied (a
new bundle also overwrites manual settings).
▪ If a registered system fails to detect the service when it restarts or checks for updates, an alert
appears on the System Status screen.
▪ If the system loses registration with the service, it continues to operate with the most recent
configuration it received.
Related Links
Access the System Web Interface
Choose Software Update Location in System Web Interface
Register with Polycom Cloud Service
Enable a Provisioning Service
You can register your Pano system with RealPresence Resource Manager in one of the following ways:
▪ Entering the required information in the General Settings of the system web interface.
▪ Running the setup wizard, which lets you know if your system detects a provisioning service on the
network.
The setup wizard is available during initial setup, after a system reset with system settings deleted,
or when performing a factory reset. For information about configuring the RealPresence Resource
Manager system so that Polycom systems detect and register with it, refer to the Polycom
RealPresence Resource Manager System Operations Guide.
Polycom, Inc.
® ®
RealPresence Resource Manager, you can use it to do the following
on page 9
on page 18
on page 45
21