Changing The Program - Smeg CW 420 User Manual

- CW 420/430
Select the program required by pressing .
Confirm the program start by pressing and holding it
down for 1 second (light L2 changes from green to
orange).
Cycle in progress, the progress of the cycle is displayed by
vertical bars which illuminate in sequence. If the door is
opened "CLOSE" flashes and the program stops.
Close the door again and confirm the program start by
pressing and holding it down for 1 second (light L2
changes from green to orange).
At the end of the program "End" flashes
Unload the dishes
When the door is closed again, the system offers the last program run.

8.4 Changing the Program

With the door closed, to change to a fresh program
instead of repeating the last one, press the button.
The programs available are displayed.
If a program has already started, press and hold it
down to interrupt it.
24