Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG302
Logging in to the WG302 Using Its Default IP Address
The default IP address of your access point is 192.168.1.128. The WG302 is set, by default, for the
DHCP client to be disabled.
Note: The computer that you use to connect to the WG302 should be configured with an
IP address that starts with 192.168.1.x and a Subnet Mask of 255.255.255.0.
1. Open a Web browser such as Internet Explorer, Netscape Navigator, or Mozilla Firefox.
2. Connect to the WG302 by entering its default address of http://192.168.1.128 into your
browser.
Figure 3-5
3. A login window like the one shown below opens:
Figure 3-6
4. Log in by using the default user name of admin and default password of password.
Once you have entered your access point name, the Web browser finds the WG302 Wireless
Access Point and displays the main menu as shown in
Basic Installation and Configuration
Figure 3-2 on page
v0.1, December 2005
3-6.
3-9