Configuring Network Authentication - NETGEAR ProSafe WG302 Reference Manual

Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG302
• Update if any station disassociates. Select this option to refresh global key when any stations
disassociated with wireless Access Point.
• Accounting Radius Server Configuration. This configuration is required for accounting
using Radius Server. IP Address, Port Number and Shared Secret is required for
communication with Radius Server. A Secondary Radius Server can be configured which is
used on failure on Primary Radius Server.
• IP Address. The IP address of the Radius Server. The default is 0.0.0.0.
• Port Number. Port number of the Radius Server. The default is 1813.
• Shared Secret. This is shared between the Wireless Access Point and the Radius Server while
authenticating the supplicant.

Configuring Network Authentication

Use the following steps to configure network authentication.
1. Connect to the WG302.
In the address field of your Web browser, enter the default LAN address of
http://192.168.1.128.
or log in by using the LAN address and password that you configured.
2. If you are using Radius Server Settings, set them up first, as described in
Radius Server Settings" on page
3. Set the Network Authentication that you
want to use.
a. On the Security menu, click Security
Profiles Settings.
b. Select the profile that you want.
c. Click Edit to view the Security Profiles
Configuration menu.
d. Choose the type of Network
Authentication that you want from the
list.
3-20
Log in with the user name of admin and default password of password,
3-19.
v0.1, December 2005
Figure 3-11
Basic Installation and Configuration
"Configuring the