Sfp Labels; General Sfp Specifications - Avaya 4900 Series Manual

The specifications in this section meet or exceed those specified in the applicable IEEE standards,
where they exist.
In these specifications, unless otherwise noted, receiver sensitivity is the minimum average input
optical power for which the receiver is guaranteed to meet the bit error rate (BER) of 10

SFP labels

The Avaya label on a typical SFP transceiver contains an Avaya serial number, a bar code, a
manufacturer code, an interface type, and a part number.
Figure 1: SFP label

General SFP specifications

The following table describes general SFP specifications.
Table 2: General SFP specifications
Parameter
Dimensions (H x W x D)
Operating temperature
Storage temperature
Maximum supply current
Maximum power consumption
April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900
Description
8.5 x 13.4 x 56.4 millimeters (0.33 x 0.53 x 2.22
inches), unless otherwise stated.
–5 to 85 ºC for RoHS -E6 models
–40 to 85 ºC
300 mA, unless otherwise stated
1.0 W, unless otherwise stated
Series
Comments on this document? infodev@avaya.com
SFP specifications
-12
.
27