Outline Drawing - Toshiba Tosvert VF-S15 Instruction Manual

 Outline drawing
5
RUN
PRG
MON
RUN STOP
EASY
MODE
60(Mounting
dimension)
72
Fig.A
2- 5
7 126(Mounting dimension)
2-R2.5
140
Fig.C
VF-S15
EMC plate
(Option)
Note 2)
Note 1. To make it easier to grasp the dimensions of each
Note 2. Here are the available EMC plate.
VF-S15
Note 3. The models shown in Fig. A and Fig. B are fixed at two
EMC plate
(Option)
Note 2)
Note 4. The model shown in Fig. A is not equipped with a
*Above dimension is the
size of EMP009Z, 45mm
and 59mm for EMP008Z.
Note 5. The cooling fan of 1-phase 200V-1.5, 2.2kW models are
L-5
5
RUN
PRG
MON
RUN STOP
EASY
93(Mounting dimension)
W
Fig.B
inverter, dimensions common to all inverters in these
figures are shown with numeric values but not with
symbols.
Here are the meanings of the symbols used.
W: Width, H: Height, D: Depth
W1: Mounting dimension (horizontal)
H1: Mounting dimension (vertical)
H2: Height of EMC plate mounting area
D2: Depth of setting dial
Fig.A : EMP007Z
Fig.B : EMP008Z
Fig.C : EMP008Z for 3-phase 400V-2.2, 3.7kW models
EMP009Z for 3-phase 200V-3.7kW model
Fig.D: EMP010Z
Fig.E : EMP011Z
points: in the upper left and lower right corners.
cooling fan.
on the upper side of the inverter.
E6581926
VF-S15
EMC plate
(Option)
Note 2)
*58mm for 1-phase 200V-
1.5, 2.2kW models.
12