6.34 Operation panel parameter
6.34.1 Prohibition of key operations and parameter settings
f700 : Parameter protection selection
f730 : Panel frequency setting prohibition (fc)
f731 : Disconnection detection of extension panel
f732 : Local/remote key prohibition of extension panel
f733 : Panel operation prohibition (RUN key)
f734 : Panel emergency stop operation prohibition
f735 : Panel reset operation prohibition
f736 : cmod/fmod change prohibition during operation
6
f737 : All key operation prohibition
f738 : Password setting (f700)
f739 : Password verification
Function
[Parameter setting]
Title
f700
f730
f732
f733
These parameters allow you to prohibit or allow operation of the RUN and STOP keys on the
operation panel and the change of parameters. Using these parameters, you can also prohibit
various key operations. Lock parameters with a password to prevent configuration.
Function
Parameter protection selection
Panel frequency setting prohibition
( fc )
Disconnection detection of extension
panel
Local/remote key prohibition of
extension panel
Panel operation prohibition
(RUN key)
Adjustment range
0: Permitted
1: Writing prohibited (Panel and
extension panel)
2: Writing prohibited (1 + RS485
communication)
3: Reading prohibited (Panel and
extension panel)
4: Reading prohibited (3 + RS485
communication)
0: Permitted, 1: Prohibited
0: Permitted, 1: Prohibited
0: Permitted, 1: Prohibited
0: Permitted, 1: Prohibited
F-122
E6581926
Default setting
0
0
0
1
0