6.34.10 Select the panel display at power on
f790 : Panel display selection at power on
f791 : 1st and 2nd characters of
f792 : 3rd and 4th characters of
f793 : 5th and 6th characters of
f794 : 7th and 8th characters of
Function
These parameters allow you to change the characters on panel display at power on.
Default setting is " hello ".
[Parameter setting]
Title
Panel display selection at power on
1st and 2nd characters of
3rd and 4th characters of
5th and 6th characters of
7th and 8th characters of
Select = and set displayed characters with to if it is displayed characters other
than " hello ".
Refer to "ASCII LED" of "Communication Function Instruction Manual : E6581913" about setting characters
and set by hex number.
Function
0: hello
1: f791 to f794
2, 3: -
0-FFFF
0-FFFF
0-FFFF
0-FFFF
F-131
Adjustment range
Default setting
E6581926
0
6
2d2d
2d2d
2d2d
2d2d