Save user setting parameters (typ = 7)
Setting typ to 7 saves the current settings of all parameters.
Load user setting parameters (typ = 8)
Setting typ to 8 loads parameter settings to (calls up) those saved by setting typ to 7.
● By setting typ to 7 or 8, you can use parameters as your own default parameters.
Cumulative fan operation time record clear (typ = 9)
Setting typ to 9 resets the cumulative operation time to 0 (the initial value).
Set this parameter when replacing the cooling fan, and so on
4
Number of starting clear (typ = 12)
Setting typ to12 resets the number of starting to the initial value (zero).
Default setting 2 (typ = 13)
Set typ to 13 to return all parameters to their default settings.
When 13 is set, init is displayed for a short time after the settings are configured and disappears,
then returns to Standard monitor mode. In this case, all parameters are returned to their defaults, and the
trip history data is cleared.
D-12
E6581926