Outline Drawing - Toshiba VF-S15 Instruction Manual

 Outline drawing
5
RUN
PRG
MON
RUN STOP
EASY
MODE
60(Mounting
dimension)
72
2- 5
7 126(Mounting dimension)
140
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
VF-S15
EMC plate
(Option)
Note 2)
Fig.A
2-R2.5
VF-S15
EMC plate
(Option)
Note 2)
*Above dimension is the
size of EMP009Z, 45mm
and 59mm for EMP008Z.
Fig.C
L-5
5
RUN
PRG
MON
RUN STOP
EASY
93(Mounting dimension)
W
Fig.B
Note 1. To make it easier to grasp the dimensions of each
inverter, dimensions common to all inverters in these
figures are shown with numeric values but not with
symbols.
Here are the meanings of the symbols used.
W: Width, H: Height, D: Depth
W1: Mounting dimension (horizontal)
H1: Mounting dimension (vertical)
H2: Height of EMC plate mounting area
D2: Depth of setting dial
Note 2. Here are the available EMC plates.
Fig.A : EMP007Z
Fig.B : EMP008Z
Fig.C : EMP008Z for 3-phase 500V-2.2, 4.0kW models
EMP009Z for 3-phase 240V-4.0kW model
Fig.D : EMP010Z
Fig.E : EMP011Z
Note 3. The models shown in Fig. A and Fig. B are fixed at
two points: in the upper left and lower right corners.
Note 4. The model shown in Fig. A is not equipped with a
cooling fan.
Note 5. The cooling fan of 1-phase 240V-1.5, 2.2kW models
are on the upper side of the inverter.
E6581611
VF-S15
EMC plate
(Option)
Note 2)
*58mm for 1-phase 240V-
1.5, 2.2kW models.
12