Names And Functions - Toshiba Tosvert VF-S15 Instruction Manual

1.3

Names and functions

1.3.1 Outside view
STATUS lamp
Lights and blinks when
®
using CANopen
communication option.
[Front view]
Hole for control circuit wiring
[Bottom view]
Note 1) Remove the protective label as shown on the next page when installing the inverter side by side with other
inverters and using the inverter in locations with temperatures above 40°C.
Protective label (Note 1)
RS485 connector
Hole for main
circuit wiring
[Side view]
A-3
E6581926
Charge lamp
Indicates there is a high
voltage still in the inverter.
Do not open the terminal
block cover when this lamp
is lit because it is dangerous.
Cover
This is the body and terminal
block cover.
Always close this cover
before operation to avoid
accidentally touching the
terminal block.
The serial number is recorded
on the back side.
Door lock
Slide the door lock to upside
for unlock.
Cooling fin
Ventilation
Name plate
Mounting part of
EMC plate
1