6.18 Operation panel parameter
6.18.1 Prohibition of key operations and parameter settings
: Parameter write protection selection
: Panel frequency setting prohibition (fc)
: Local/remote key prohibition of extension panel
: Panel operation prohibition (RUN/STOP keys)
: Panel emergency stop operation prohibition
: Panel reset operation prohibition
: / change prohibition during operation
: Password setting ()
: Password verification
Function
These parameters allow you to prohibit or allow operation of the RUN and STOP keys on the
operation panel and the change of parameters. Using these parameters, you can also prohibit
various key operations. Lock parameters with a password to prevent configuration.
[Parameter setting]
Title
Parameter write protection selection
Panel frequency setting prohibition (fc) 0: Permitted, 1: Prohibited
Local/remote key prohibition of
extension panel
Panel operation prohibition (RUN/STOP
keys)
Panel emergency stop operation
prohibition
Panel reset operation prohibition
/ change prohibition
during operation
Password setting ()
Password verification
Function
0: Permitted
1: Prohibited (Panel and
2: Prohibited (1 + RS485
0: Permitted, 1: Prohibited
0: Permitted, 1: Prohibited
0: Permitted, 1: Prohibited
0: Permitted, 1: Prohibited
0: Permitted, 1: Prohibited
0: Password unset
1-9998
9999: Password set
0: Password unset
1-9998
9999: Password set
F-55
Adjustment range
extension panel)
communication)
E6581595
6
Default setting
0
0
1
0
0
0
1
0
0