Mix-Point Dialog Box - Extron electronics DMP 128 Plus User Manual

Mix-Point Dialog Box

Double-click a mix-point to open the
mix-point with a single click and press the
Figure 93.
Mix-point Input and Output — Displays which input (top) and output (bottom) the
1
mix-point is connecting.
Mix-point Fader — Click and drag the mix-point fader to provide up to 12 dB of gain
2
or 100 dB of attenuation in 1 dB steps. Click the fader and use the
<Down Arrow>
Level Text Box — Allows specific level values to be entered in 0.1 dB steps.
3
Mute Button — Mutes the mix-point (muted by default). When the button is red, the
4
mix point is muted.
Mix Dot Selection — Three radio buttons provide options to choose the type of input
5
processing applied to the mix-point.
NOTE: Mix dot selections are not available on Virtual Return or EXP mix-points.
OK Button — Confirms changes made to the contained parameters and closes the
6
Mix-point
Cancel Button — Reverts any changes made to the contained parameters back to
7
their states when the current instance of the
closes the dialog box.
Mix-point
Mix-point Input and Output
1
Mix-point Fader
2
Level Text Box
3
Mute Button
4
Mix Dot Selection
5
OK Button
6
Cancel Button
7
Mix-point Dialog Box
keys to change the level in 1 dB steps.
dialog box.
dialog box. Alternatively, highlight a
key to open the
<Enter> Mix-point
dialog box was opened and
Mix Point
DMP 128 Plus • DSP Configurator Software
dialog box.
or
<Up Arrow>
56