Extron electronics DMP 128 Plus User Manual page 88

8. Click at the top of the dialog box and enter a new name for the macro in
Change Name
the text field. Default macro names are
Select Macro
9.
Up to 32 actions can be configured per macro. Follow steps 3 through 7 to configure
additional actions.
10. Connect Live to the DMP 128 Plus and click
DMP 128 Plus. Once the macro has been pushed, it can be run via DSP Configurator, a
control system, or SIS commands.
NOTES:
• A macro cannot be run until it is pushed to the device. Edits made to an existing
macro must also be pushed to the device.
• Macro configuration data is saved on a per-line basis. When an action is completely
configured, the data is saved even if the
•
Macro configurations are saved when the DSP Configurator configuration file is
saved.
• If DSP Configurator is closed without saving the configuration file or pushing the
macro to a DMP 128 Plus, unsaved macro configuration data is deleted.
To delete a Macro:
1. Click
Tools > Configure Macros
2. From the
Select Macro
3. Once the macro information is displayed, click
left corner of the
Configure Macros
To run a Macro:
1. Connect to the DMP 128 Plus in Live mode (see
page 18).
2. Click
Tools > Configure Macros
3. From the
Select Macro
4.
Once the macro information is displayed, click
-or-
1. Connect to the DMP 128 Plus in Live mode (see
page 18).
2. Select the macro to be run from the
Figure 141. Run Macro Drop-Down
To edit remote destinations:
1. Click
Edit Remote Destinations
2. Select an existing device from the
3. Edit the information for the device or click
4. Click to save changes made to the remote destination.
Apply
5. Click to close the
Close
NOTE: See step 3 on the previous page for information on adding a destination.
Push Macro to Device
Configure Macros
.
drop-down, choose the macro to be deleted.
Delete Current Macro
dialog box.
Live and Emulate Panel
.
drop-down, choose the macro to be run.
Run Macro
Live and Emulate Panel
drop-down in the tool bar.
Run Macro
from the
Configure Macros
Unique Device Name
to remove the selected device.
Delete
Edit Remote Destinations
DMP 128 Plus • Configuration Tools
, , and so on.
Macro 1 Macro 2
to push it to the
dialog box is closed.
in the bottom
on
.
on
dialog box.
drop-down.
dialog box.
80