Mic/Line Inputs; Renaming Input Channels; Mic/Line Gain Dialog Box - Extron electronics AXI 22 AT User Manual

Mic/Line Inputs

The AXI 22 AT has two mic/line inputs and the AXI 44 AT has four mic/line inputs. The AXI
mic/line inputs transmit signal to the Dante network and appear on the Dante network as
Transmitter channels.

Renaming Input Channels

Mic/line input names are read from the Dante transmitter channel labels cannot be changed
in DSP Configurator. To change an input channel name, rename the Transmitter label in
Dante Controller (see
NOTE: If Dante transmitter channels are renamed in Dante Controller, DSP Configurator
TIP:

Mic/Line Gain Dialog Box

Double-click the input gain block (
input settings.
1
2
3
4
5
6
7
8
9
Renaming a Transmitter
continues to display the default names.
It is essential that Dante Transmitter channels be named before audio
subscriptions are established. Existing subscriptions are removed when transmitter
channels are renamed.
Input Name — This name remains as the default channel
name even if the channel is renamed in Dante Controller.
dBFS Meter — This meter displays the input signal level in
dBFS ranging from -60 dBFS to 0 dBFS. Once the signal
reaches or exceeds -1 dBFS (default) or the clip threshold
defined in the dialog box, the clip box located at the
Options
top of the meter lights red. A numerical readout of the input
level is located below the meter.
Gain Fader — Click and drag the fader to provide up to
42 dB of gain in 3 dB steps. Click the fader once and press
the or
<Up Arrow> <Down Arrow>
in 3 dB steps. Press
<Page Up>
keyboard to adjust the fader in 9 dB steps.
Input Gain Text Box — Allows the user to enter a gain value
in 3 dB steps.
Mute Button — Mutes the signal at the input stage. When the
button is red, mute is engaged.
Phantom Power Checkbox — Applies 48 V phantom power
to the selected input for use with condenser microphones.
OK Button — Confirms changes made to the contained parameters and closes the
dialog box.
Mic/Line Gain
Cancel Button — Reverts any changes made to the contained parameters back to
their states when the current instance of the
and closes the dialog box.
Mic/Line Gain Help Button — Opens the
DSP Configurator Help file for further assistance in configuring input gain.
on page 26).
) to open the
Mic/Line Gain
keys to adjust the fader
or on the
<Page Down>
Mic/Line Gain
Mic/Line Input Gain
AXI 22 AT and AXI 44 AT • DSP Configurator Software
dialog box to configure
9
1
2
3
4
5
6
7 8
dialog box was opened
topic of the
18