Tools - Extron electronics DMP 128 Plus User Manual

Tools

Figure 19.
Presets — Contains a submenu to mark and clear elements in the main workspace as
1
well as an option to save marked elements to a preset (see
Configure Groups — Opens the
2
delete Gain, Mute, Bass, and Treble groups (see
Configure Digital I/O — Opens the
3
actions and modes to the digital inputs and outputs (see
Configure Players — Opens the
4
and assign them to players. Player control options are also found in the dialog box (see
Players
Configure ACP Panels — Opens the
5
Audio Control Panel interfaces (see
Configure Macros — Opens the
6
and deleting macro functions (see
Connect/Disconnect from Device — When in Emulate mode, this reads
7
to Device
Disconnect from Device
from Device
Device Manager — Opens the
8
page 81).
Issue RESET Command — Clears the DMP 128 Plus of all processors and other
9
configuration settings. This command does not reset general settings such as IP
address.
Firmware Loader — Opens the Firmware Loader application, if it is installed (see
¢
Firmware Loader
Organize Building Blocks – Opens the
£
Organize Building Blocks
Tools Menu
Configure Groups
Configure Players
on page 75).
Audio Control Panels (ACP)
Configure Macros
Macros
and opens the
Connect to Device
on page 83). When in Live mode, this reads
and returns the software to Emulate mode.
Device Manager
on page 83). Visit
on page 87).
Presets
dialog box to create, edit, and
Groups on page 69).
Configure Digital I/O
Digital I/O
dialog box to upload audio files
dialog box to configure Extron
Configure ACPs
dialog box for creating, editing,
on page 78 for more information).
dialog box (see
dialog box (see
www.extron.com to download the software.
Organize Building Blocks
DMP 128 Plus • DSP Configurator Software
on page 67).
dialog box to assign
on page 72).
on page 98).
Connect
Connect to or
Disconnect
Device Manager on
dialog box (see
15