Symbol Definitions; Special Characters - Extron electronics DMP 128 Plus User Manual

Symbol Definitions

]
}
•
|
E
W
X7@ = Gain and trim control
X7# = Level value
X7$ = Mute status
= Group master group number
X7%
= Group fader setting
X7^
= Group fader increment
X7&
= Group fader soft limit
X7*
= Group type
X7(

Special Characters

The HTML language reserves certain characters for specific functions. The device will not
accept the following characters as a part of preset names, the device names, passwords, or
locally created file names.
The DMP 128 rejects the following characters:
{space (OK for names)} + ~ , @ = ' { } [ ] < > ` " ; : \ ?
= Carriage return/line feed
= Carriage return (no line feed)
= Space character
=
Pipe (can be used interchangeably with the
= Escape key
=
Can be used interchangeably with the
See Object ID (OID) Number Tables
Level values use a 10x multiplier system to set gain via SIS
command. For example, if the desired gain value is +10.3 dB,
the SIS value would be
is -8.2 dB, the SIS value would be
-12.0 dB to +12.0 dB, (-120 to 120) in 0.1 dB increments.
-18.0 dB to +80 dB, (-180 to 800) in 0.1 dB increments.
-100.0 dB to +12.0 dB, (-1000 to 120) in 0.1 dB increments.
NOTE: The integers only need to be signed if they are a
negative number.
= unmute
0
= mute (see
1
through
01
dB, value in 0.1 dB increments using a 10x multiplier and
negative numbers, but not decimal places. The valid range
depends on the type of gain block that is assigned to the group
number
to
-180
to
-1000
to
-1000
to
-120
to
-1000
NOTE: Leading zeros are ignored.
dB value, in 0.1 dB increments, to raise or lower a group fader
dB value, in 0.1 dB increments. The valid range
within the range for the gain block grouped in
= gain
6
= mute
12
}
character)
E
character
(10.3 x 10), if the desired gain value
103
-82
Object ID (OID) Number Tables
64
X7%
specified in the command:
(-18.0 dB to +80 dB)
800
(-100.0 dB to +12.0 dB)
120
(-100.0 dB to +12.0 dB)
120
(-12.0 dB to +12.0 dB)
120
(-100.0 dB to +0.0 dB)
0
DMP 128 Plus • Remote Control and Configuration
on page 150.
(-8.2 x 10), and so on.
on page 150)
X7^
must be
X7%
.
142