Players - Extron electronics DMP 128 Plus User Manual

Players

The
DMP 128 Plus and is available when connected Live to the device. Once the audio file
is uploaded, it may be assigned to one of eight players. Configured players may then be
assigned to any of the Aux inputs and routed to the desired output for audio file playback
(see
1
2
3
4
Figure 134.
1
2
3
4
5
6
7
dialog box allows the user to upload audio files to a
Configure Players
Aux Inputs on page 43).
Files in the Device
Add File to Device Button
Remove File from Device Button
Players
Configure Players Dialog Box
Files in the Device — Lists the audio files stored on the DMP 128 Plus. The file names
and extensions are listed in the
column.
Size (KB)
NOTE: Default files in the device are white noise, pink noise, and sine wave.
Add File to Device Button — Opens the
dialog box where an audio file is selected to load onto the DMP 128 Plus.
NOTES:
• Only .wav, .mp3, .wma, .aiff, .aac, and .raw audio file types are accepted.
• All audio files are converted to .raw at a 48 kHz sampling rate when uploaded
to the DMP 128 Plus.
• File names containing spaces are not accepted.
Remove File from Device Button — Removes the selected file from the device.
Players — Contains 8 players that can have audio files assigned to them. Each player
contains a check box that repeats the audio file until
Repeat
The field specifies the number of seconds between each repeat of the
Repeat Delay
audio file. To assign an audio file from the device to one of the 8 players, click and drag
the desired audio file to the desired player. The filename of the player changes from
to the name of the file assigned to the player.
[unassigned]
Start Player Button — Starts playing the audio file assigned to the selected player.
NOTE: This button is only available when the player is inserted into the Aux input
(see Aux Inputs on page 43 for more information).
Stop Player Button — Stops playing the audio file assigned to the selected player.
Clear Player Button — Removes the assigned audio file from the selected player, but
does not remove it from the device. Player reverts to
Start Player Button
5
Stop Player Button
6
Clear Player Button
7
column, with the size of the file listed in the
Filename
Select Audio file to load to device
[unassigned]
DMP 128 Plus • Configuration Tools
is selected.
Stop Player
.
75