Input Dynamics Blocks - Extron electronics DMP 128 Plus User Manual

Input Dynamics Blocks

Double-click the
Figure 54.
From the
Dynamics
Select a dynamics processor type to insert it into the
There are two
configured with any of the processor types.
The four types of dynamics processors available are:
AGC (Automatic Gain Control)
•
• Compressor
Limiter
•
• Noise Gate
Once a dynamics processor is inserted, double-click the dynamics block icon to open the
corresponding dialog box.
Figure 55.
If a dynamics processor has been inserted and needs to be changed to a different dynamics
processor, right-click the dynamics block, hover over
to insert it (see figure 56 below).
Figure 56.
block to open the dynamics drop-down menu.
Dynamics
Dynamics Block and Drop-Down Menu
drop-down menu, four types of dynamics processors are available.
blocks available per mic/line input channel. Each block can be
Dynamics
on the next page
on page 34
on page 35
on page 36
AGC, Compressor, Limiter, and Noise Gate Icons
Changing Dynamics Processors
block.
Dynamics
, and select a new processor
Insert
DMP 128 Plus • DSP Configurator Software 32