Organize Building Blocks - Extron electronics DMP 128 Plus User Manual

9.
10.

Organize Building Blocks

Extron building blocks are a quick configuration tool that can significantly reduce
configuration time. A building block is a collection of processor and gain settings for an input
or output processing chain. Building blocks have been built by Extron based on extensive
use and testing with each intended application or specific device. The
Blocks
building blocks, export existing building blocks, delete building blocks, and restore default
building blocks that may have been deleted by the user. Building blocks in the
Building Blocks
multitude of applications.
Select
dialog box.
An installation status dialog box opens that displays the completion status of firmware
download and installation.
When the firmware is installed, the
installation is complete and the install location of the firmware file. By default, firmware is
installed in:
Program Files > Extron > Firmware > DMP_128_Plus > vx.xx
If the
View Firmware Release Notes
below), a PDF of the firmware release notes opens automatically. The box is checked by
default.
Click to close the dialog box (
Finish
Figure 151. Firmware Installed Dialog Box
dialog box allows users to organize building blocks to their preference, import new
dialog are organized into folders for easily locating building blocks for a
Tools > Organize Building Blocks
dialog box displays that the
Firmware Upgrade
checkbox is checked (see figure 151,
).
¢
to open the
Organize Building Blocks
DMP 128 Plus • Configuration Tools
9
Organize Building
Organize
87