Extron electronics DMP 128 Plus User Manual page 44

Noise Gate
Figure 60. Noise Gate Dialog Box
Noise Gate Channel Name — This name changes to match the default or user
1
defined input name.
Noise Gate Graph — Graphically displays noise gate parameter settings. Parameters
2
can also be adjusted using this graph. Click and drag the upper dot to adjust
Click and drag the middle dot to adjust
of view at default settings) to adjust
Noise Gate Parameter List and Control — Lists all configurable parameters for
3
the noise gate. Text fields are available to adjust
, ,
Ratio Attack Time
adjust ,
Attack Time Hold Time
and
<Left Arrow> <Right Arrow>
steps.
Bypass Button — Bypasses the noise gate. When the button is red, bypass is
4
enabled.
Set Defaults Button — Resets all noise gate parameters to their default values. To
5
view individual parameter default settings, see the DSP Configurator Help file by clicking
the button (
Dynamics Help
OK Button — Confirms changes made to the contained parameters and closes the
6
dialog box.
Noise Gate
Cancel Button — Reverts any changes made to the contained parameters back to
7
their states when the current instance of the
closes the dialog box.
Dynamics Help Button — Opens the
8
DSP Configurator Help file for further assistance in operating dynamics processors.
Noise Gate Channel Name
1
Noise Gate Graph
2
Noise Gate Parameter List and Control
3
Bypass Button
4
Set Defaults Button
5
OK Button
6
Cancel Button
7
Dynamics Help Button
8
Threshold
Max Attenuation
Threshold
, and
Hold Time Release Time
, and
Release Time
keys to adjust the respective parameter in 1 ms
) and navigate to the
8
Noise Gate
Dynamics Operation
DMP 128 Plus • DSP Configurator Software
Ratio
. Click and drag the bottom dot (out
.
,
Max Attenuation
. Click and drag the sliders to
. Click a slider once and use the
topic.
About Dynamics
dialog box was opened and
topic of the
.
,
36