Edit; View - Extron electronics DMP 128 Plus User Manual

Edit

Figure 17.
Cut — Removes the configuration of selected elements in the workspace to be pasted
1
to other elements.
Copy — Copies the configuration of selected elements in the workspace to be pasted
2
to other elements.
Paste — Applies the cut or copied configuration of elements to the selected elements
3
in the workspace.

View

Figure 18.
Meter Bridge — Opens a meter bridge to view input and output activity. The meter
1
bridge is a floating window, allowing use of the DSP Configurator workspace while
simultaneously monitoring input and output activity.
NOTE: The meter bridge is only available in Live mode with a TCP/IP connection.
Re-enable All Dialogs — This option re-enables all dialog boxes that no longer
2
appear based on user selection (certain dialog boxes that appear are user-defeatable by
selecting a checkbox that reads
Group Controls — Opens the
3
controls and add new groups.
AT Meters (AT models only) — Opens a dialog box to select AT devices on the
4
network. Double-click a device to open a meter bridge dialog box that displays AT
transmit (Tx) and receive (Rx) channel levels for that device. The dialog box is a floating
window, allowing use of the main workspace while simultaneously monitoring AT levels.
Show All Channels — Individual channels can be hidden by user selection. This
5
provides options for the user to select which input and output groups are visible in the
main workspace.
Edit Menu
View Menu
Do Not Show This Dialog Again
Group Controls
dialog box to access existing group
DMP 128 Plus • DSP Configurator Software
).
14