Input Processing; Input Gain Block - Extron electronics DMP 128 Plus User Manual
12x8 prodsp digital
matrix processor
Hide thumbs
Also See for DMP 128 Plus:
- Setup manual (4 pages) ,
- Setup manual (4 pages) ,
- User manual (95 pages)
Table of Contents
Advertisement
Input Processing
Input Gain Block
on
The mic/line input processing chain in DSP Configurator is visually represented by a string of
blocks (see figure 42 below). Each block contains a specific processor or type of processor.
For example, the
Input Gain
the
block contains several types of filters, and so on. Inputs 1 - 8 contain the
Filter
following signal chain:
1.
Input Gain Block
2.
Input Filter Block
3.
Input AEC Block (C Models Only)
4.
Input Dynamics Blocks
5.
Input Delay Block
6.
Input Ducking Block
7.
Input Automix Block
8.
Input Pre-Mixer Gain Block
Figure 42.
Input Processing Chain for Inputs 1 - 8
Inputs 9 - 12 do not contain AEC processing or phantom power. All other processors are
available and function the same as inputs 1 - 8.
Figure 43.
Input Processing Chain for Inputs 9 - 12
Double-click the
Input Gain
Figure 44.
Input Gain Block
block contains a fader to boost or attenuate incoming signal,
(2)
block to open the
Input Gain
DMP 128 Plus • DSP Configurator Software
dialog box.
24
Advertisement
Table of Contents
