Extron electronics DMP 128 Plus User Manual page 110
12x8 prodsp digital
matrix processor
Hide thumbs
Also See for DMP 128 Plus:
- Setup manual (4 pages) ,
- Setup manual (4 pages) ,
- User manual (95 pages)
Table of Contents
Advertisement
9.
From the panel graphic on the left side of the dialog box, select the button labeled
(see
figure
Source #1
10.
From the
Control Type
a.
From the
Volume Master
first program source channels.
b.
From the
Mute Master
first program source channels.
11.
Repeat steps 9 and 10 for additional individual program sources using the
and
buttons (up to three program sources can be controlled with this
SOURCE #3
configuration).
12.
From the panel graphic on the left side of the dialog box, select the button labeled
(see figure 167,
below).
1
13.
From the
Control Type
for the
•
Action-Fixed
•
Action-Follow Selector
selector button.
If
was chosen:
Action-Fixed
a.
From the
drop-down (
Action
b.
From the
Mute Master
output channels.
c.
From the
LED Behavior
the button red when mute is engaged, or
button white when mute is engaged.
If
Action-Follow Selector
a.
From the
drop-down (
Action
b.
From the
LED Behavior
the button red when mute is engaged, or
button white when mute is engaged.
Figure 167.
Mute Button Configuration
166,
on the previous page).
8
drop-down (
), choose
4
Selector-Vol/Mute
drop-down (
), select the gain group containing just the
5
drop-down (
), select the gain group containing just the
6
drop-down (
), select either:
2
button to mute all output.
MUTE
for the
button to mute groups defined by a
MUTE
), select
3
Group Mute Toggle
drop-down (
), select the mute group containing all
4
drop-down (
), select
5
White reflects Mute On
was chosen:
), select
6
Group Mute Toggle
drop-down (
), select
7
White reflects Mute On
DMP 128 Plus • Audio Control Panels
.
SOURCE #2
.
to turn
Red reflects Mute On
to turn the
.
to turn
Red reflects Mute On
to turn the
MUTE
102
Advertisement
Table of Contents
