Input Dynamics Blocks - Extron electronics XMP 240 C AT User Manual

, and
Time
Double Talk Echo Reduction — Provides a text box to enter a reduction value (in dB)
4
when double talk occurs. Double talk is when near end talkers and far end talkers are
speaking simultaneously while AEC is engaged.
Comfort Noise Text Box — Provides an ambient noise signal to prevent states of
5
complete silence that may be perceived as a failed or dropped connection. 0 dB is the
default.

Input Dynamics Blocks

Double-click the
Figure 46.
From the
Dynamics
Select a dynamics processor type to insert it into the
There are two
configured with any of the processor types.
The four types of dynamics processors available are:
• AGC (Automatic Gain Control)
• Compressor
Limiter
•
• Noise Gate
Once a dynamics processor is inserted, double-click the dynamics block icon to open the
corresponding dialog box.
Figure 47.
If a dynamics processor has been inserted and needs to be changed to a different dynamics
processor, right-click the dynamics block, hover over
insert it (see figure 48).
to customize NLP reduction parameters.
Release Time
block to open the dynamics drop-down menu.
Dynamics
Dynamics Block and Drop-Down Menu
drop-down menu, four types of dynamics processors are available.
blocks available per mic/line input channel. Each block can be
Dynamics
on the next page
on page 32
on page 33
on page 34
AGC, Compressor, Limiter, and Noise Gate Icons
block.
Dynamics
, and select a new processor to
Insert
XMP 240 C AT • DSP Configurator Software 30