View; Tools - Extron electronics AXI 22 AT User Manual

View

Meter Bridge — Opens a meter bridge to view
1
input and output activity. The meter bridge is
a floating window, allowing the user to use the
DSP Configurator Software workspace while
simultaneously monitoring input and output activity.
NOTE: The meter bridge is only available in Live mode.
Re-enable All Dialogs — This option re-enables all dialog boxes that no longer appear
2
based on user selection (certain dialog boxes that appear are user-defeatable by
selecting a checkbox that reads

Tools

Presets — Contains a submenu to mark and clear elements in the main workspace as
1
well as an option to save marked elements to a preset (see
Connect to/Disconnect from Device — When in Emulate mode, this option
2
reads
Connecting Live to a Device
(see
page 16). When in Live mode, this reads
Disconnect from Device
software to Emulate mode.
Device Manager — Opens the
3
Manager
( ) in the top right corner of the dialog box
to view the
information on using the Device Manager.
Issue RESET Command — Clears all gain
4
settings, attenuation settings, and presets
for the AXI. This command does not reset
general settings such as device name or
Dante network configuration.
Firmware Loader — Opens the Firmware Loader application if it is installed (see
5
the Firmware Loader Help file for help updating firmware). Visit
download Firmware Loader.
Device Settings — Opens the
6
and view the network configuration. Click the help icon (
dialog box to view the
Options — Opens the
7
appearance and default settings. Click the help icon (
dialog box to view the
Network Audio Control — Opens Dante Controller by Audinate for routing audio
8
over a Dante network (see
installed in order for the application to be opened. Visit
Dante Controller.
Do Not Show This Dialog Again
and opens the
Connect to Device
and returns the
Device
dialog box. Click the help icon
topic for more
Device Manager
Device Settings
Device Settings
dialog box to configure DSP Configurator Software
Options
topic for more information.
Options
Dante Controller
AXI 22 AT and AXI 44 AT • DSP Configurator Software
1
2
Presets
Connect to Device...
on
1
2
3
4
5
6
7
8
www.extron.com
dialog box to edit the device name
) in the top right corner of the
topic for more information.
) in the top right corner of the
on page 20). Dante Controller must be
www.extron.com
).
on the next page).
dialog box
to
to download
14