Tools; Window - Extron electronics AXI 22 AT User Manual

Tools

Presets — Contains a submenu to mark and clear elements in the main workspace as
1
well as an option to save marked elements to a preset (see
Connect to/Disconnect from Device — When in Emulate mode, this option
2
reads Connect to Device and opens the Connect to Device... dialog box
(see Connecting Live to a Device
page 15). When in Live mode, this reads
Disconnect from Device and returns the
software to Emulate mode.
Device Manager — Opens the Device
3
Manager dialog box. Click the help icon
( ) in the top right corner of the dialog box
to view the Device Manager topic for more
information on using the Device Manager.
Issue RESET Command — Clears all gain
4
settings, attenuation settings, and presets
for the AXI. This command does not reset
general settings such as device name or
Dante network configuration.
Firmware Loader — Opens the Firmware Loader application if it is installed (see
5
the Firmware Loader Help file for help updating firmware). Visit
download Firmware Loader.
Device Settings — Opens the Device Settings dialog box to edit the device name
6
and view the network configuration. Click the help icon (
dialog box to view the Device Settings topic for more information.
Options — Opens the Options dialog box to configure DSP Configurator Software
7
appearance and default settings. Click the help icon (
dialog box to view the Options topic for more information.
Network Audio Control — Opens Dante Controller by Audinate for routing audio
8
over a Dante network (see
installed in order for the application to be opened. Visit
Dante Controller.

Window

Cascade — Organizes windows by
1
cascading them in the same order they were
opened.
Close All Windows — Closes all open
2
windows, leaving only the main workspace
visible. When windows are closed, changes
to any of the parameters in the open
windows are saved before the windows are
closed.
List of Open Windows — Below the dividing line in the menu is a list of all open
3
windows. Select a window from the list to bring it into focus and to the forefront of the
workspace. Windows appear in the order they were opened.
on
1
2
3
4
5
6
7
8
Dante Controller on page 19). Dante Controller must be
1
2
3
AXI 22 AT and AXI 44 AT • DSP Configurator Software
Presets on the next page).
www.extron.com
) in the top right corner of the
) in the top right corner of the
www.extron.com to download
to
13