Color Menu; Drum Cleaning - Oki MC573 Advanced Manual

Item Factory
default
setting
BG Setting Black 0
Yellow 0
Magenta 0
Cyan 0
HU Setting OFF
VL Cleaning -
Gloss Mode OFF
• Print Position Adjust
Item Factory
default
setting
Tray 1 X Adjust 0 mm
Y Adjust 0 mm
Duplex X Adjust 0 mm
Duplex Y Adjust 0 mm
Tray 2/3 X Adjust 0 mm
(Optional)
Y Adjust 0 mm
Duplex X Adjust 0 mm
Duplex Y Adjust 0 mm
MP Tray X Adjust 0 mm
Y Adjust 0 mm
Duplex X Adjust 0 mm
Duplex Y Adjust 0 mm

• Drum Cleaning

Item Factory
default
setting
Drum Cleaning OFF
Description
Corrects variations in print results caused by temperature and
humidity conditions and differences in print density and
frequency. Change the setting if the background is dark.
Sets the mode to remove stain generated while being left for a
long time.
Cleans the image drum.
Set this mode when vertical white lines appear on the output.
Raises the fusing temperature and prints highly glossy images.
Set to [ON] when printing highly glossy images.
Description
• X Adjust: Adjusts the position of the entire printing image
perpendicular to the direction of paper movement.
Available range: ±2.00 mm (0.25 mm increments).
• Y Adjust: Adjusts the position of the entire printing image
parallel to the direction of paper movement.
Available range: ±2.00 mm (0.25 mm increments).
• Duplex X Adjust: Adjusts the position of the image on the
back side of a duplex print perpendicular to the direction of
paper movement.
Available range: ±2.00 mm (0.25 mm increments).
• Duplex Y Adjust: Adjusts the position of the image on the
back side of a duplex print parallel to the direction of paper
movement.
Available range: ±2.00 mm (0.25 mm increments).
Description
Sets whether to clean the drum before printing. The image
quality improvement may be expected.
• Hex Dump
Item
Hex Dump

Color Menu

Item
Density Control
Adjust Density
Color Tuning / Print Pattern
Cyan Tuning Cyan Highlight
Cyan Mid-Tone
Cyan Dark
Magenta Tuning Magenta Highlight
Magenta Mid-Tone
Magenta Dark
Yellow Tuning Yellow Highlight
Yellow Mid-Tone
Yellow Dark
Black Tuning Black Highlight
Black Mid-Tone
Black Dark
Density Cyan
Magenta
Yellow
Black
Adjust Registration
Ink Simulation Ink Simulation
- 334 -
9. Operating Management/ Specifications
Factory Description
default
setting
OFF Prints out the data received from the host computer in hex. To
finish printing, turn the machine off.
Factory default setting
Auto Select "Auto" or "Manual"
for adjusting density.
- Adjusting density is
performed right after this
menu is selected.
- A test page is printed for
checking the adjusting value
to be entered for any other
C/M/Y/K Tuning menus.
0 Adjust the value for
Highlight / Mid-tone / Dark of
0
each color within a range of
0
-3 to +3.
0
+ : Adjusted to be darker.
- : Adjusted to be lighter.
0
0
0
0
0
0
0
0
0 Adjust the total density of
each color within a range of
0
-3 to +3.
0
+ : Adjusted to be darker.
0
- : Adjusted to be lighter.
Color registration
adjustment is performed.
OFF Sets the ink simulation. This
setting is enabled only for
PS language jobs.
Description