Horizontal Lines And Spots Appear Periodically; White Area On Paper Is Lightly Stained - Oki MC573 Advanced Manual

Horizontal Lines and Spots Appear Periodically

Cause
If the intervals of lines or spots are Lightly wipe the image drum with a
approximately 94 mm (3.7 inches), the soft tissue paper.
green tube of the image drum is Replace the image drum if it is
damaged or dirty. damaged.
If the intervals of lines or spots are Open and close the output tray, and
approximately 30 mm (1.2 inches), then print again.
there may be foreign objects in the
image drum.
The image drum has been exposed to Place the image drum back into the
light. machine, and then do not use for a
few hours. If the problem persists,
replace the image drum.
The paper feed path is dirty. Print a few test copies.
Solution Reference
Replacing the Image Drum
(User's Manual)
-
Replacing the Image Drum
(User's Manual)
Copying (User's Manual)

White Area on Paper is Lightly Stained

Cause
The paper has a static charge. Use paper stored under proper
temperature and humidity conditions.
The paper is too thick. Use thinner paper.
The toner is low. If "Toner Low" or "Toner Empty.
Replace with new Toner Cartridge."
appears, replace the toner cartridge.
- 293 -
7. Troubleshooting
Solution Reference
Loading Paper (User's Manual)
Loading Paper (User's Manual)
Replacing the Toner Cartridges
(User's Manual)