Print Problems; Network Connection Problems - Oki MC573 Advanced Manual

Print Problems

This section describes problems with printing from a computer.
• If you cannot solve a problem with the following solutions, contact your dealer.
• For problems caused by an application, contact the manufacturer of the application.
• Unable to Print (User's Manual)

• Network Connection Problems

• Wireless LAN Connection Problems
• USB Connection Problems
Network Connection Problems
• Common to Windows and Mac OS X
Cause
Using a cross cable.
The machine was turned on before a
cable was connected.
There is a problem with the
compatibility with the hub.
The network connection setting is
incorrect.
• For Windows
Cause
The IP address is incorrect.
All pages are not printed.
- 277 -
Solution
Use a straight cable. -
Connect cables before turning the
Connecting This Machine to a
machine on.
Computer (User's Manual)
On the touch panel, press [Device -
Settings], select [Admin Setup] >
[Network Menu] > [Network Setup] >
[Network Setting] > [HUB Link
Setting], and then change the setting.
To connect to a wired network, set
Connecting This Machine to a
[Wired] for the network connection to
Computer (User's Manual)
[Enable].
Solution
• Check that the same IP address is
Easy Setup
set for the machine and the
machine's port setting on the
OKI LPR Utility
computer.
• Check that the IP address is not
duplicated by another device.
• Check that the correct IP address,
subnet mask, and gateway address
are set.
• If using OKI LPR Utility, check the
IP address setting with OKI LPR
Utility.
If you are using the WSD port, -
change it to the standard TCP/IP
port.
7. Troubleshooting
Reference
Reference