Oki MC573 Advanced Manual page 331

Item
Print Check Message
• USB Memory Setup
Item
File Name
• Shared Folder Setup
Item
Configure Shortcuts
• TWAIN Setup
Item
Network TWAIN
Port No.* 2
Factory Description
default
setting
OFF Sets whether to report the error content if a
transmission error occurs.
Factory Description
default
setting
(NULL) Sets the default file name. You can enter up
to 64 characters.
The following options can be set as the
1
default file name.*
#n: adding a serial number from 00000 to
99999
#d: adding the date of a file creation
(yymmddhhmmss)
(yymmddhhmmss)
Factory Description
default
setting
01: Color Mode Sets the shortcut button for the [Scan To
02: Scan Size Shared Folder] tab.
03: Duplex
Scan
04: File Name
05: SubFolder
Factory Description
default
setting
ON Sets whether to use the Network TWAIN.
9967 Sets the port number.
Available range: 1 to 65535
• WSD Scan Setup
Item
WSD Scan
Binding
• PC Scan Mode
Item
PC Scan Mode
• Scanner Adjust
Item
Scanner Calibration
Auto Color Judge Level
Blank Page Skip Level
Adjust Scan FBS Side Reg.
Position
Front Edge
ADF(Front- Side Reg.
side)
Front Edge
Back Edge
ADF(Back-side) Front Edge
Back Edge
Adjust ADF Scan Position
*1 For profiles, "#n" or "#d" can be specified for [File Name].
If specifying "#n": 5-digit serial number from 00000 to 99999
If specifying "#d": Date and time when a file is created. 12-digit number in
yymmddhhmmss format
yy: Year created (the last two
digits of the Christian Era)
mm: Month created (01 to 12)
- 331 -
9. Operating Management/ Specifications
Factory Description
default
setting
Enable Specifies whether to use WSD Scan.
Long Edge Bind Sets the default binding position.
Factory Description
default
setting
Simple Scan Selects the default PC scan mode.
Mode
Factory Description
default
setting
Execute Executes scanner calibration.
4 Sets the criteria of document color.
Available range: 1 to 5
3 Sets the criteria of white page.
Available range: 1 to 5
0 Adjusts the reading position at the document
glass and the ADF.
0
When the scanning result is missing the
0
document edge or reads the shadow of the
0
document edge, carry out the adjustment of
the setting value.1step: 0.17mm
0
0
0
0
hh: Hours created (00 to 23)
mm: Minute created (00 to 59)