Oki MC573 Advanced Manual page 337

Item Factory default setting
Text Height Same
EPSON FX Setup
Item Factory default setting
Character Pitch 10 CPI
Character Set SET-2
Symbol Set IBM-437
Letter O Style Disable
Zero Character Normal
Line Pitch 6 LPI
White Page Skip OFF
CR Function CR
Line Length 80 Column
Form Length 11.7 inch or 11 inch
TOF Position 0.0 inch
Left Margin 0.0 inch
Fit To Letter Disable or Enable
Text Height Same
Private Print Setup
Description
Sets the height of a character.
SAME: The height stays the same
regardless of CPI.
Verify job option
DIFF: The height varies according to
CPI.
Erase job option
Description
Specifies character pitches.
Specifies a character set.
Specifies a symbol set.
Specifies the style that replaces 9BH
Keep job for
with letter o and 9DH with a zero.
Sets the zero to be slashed or
unslashed.
Specifies the line spacing.
Selects whether to print blank pages.
Select a carriage return from [CR] or
[CR+LF].
Specifies the number of characters
Job Limitation
per line.
Specifies the length of paper.
Specifies the distance from the top
edge of paper to where the cut is to be
made. Job Password Authentication
Specifies the distance from the left
edge of paper to where the cut is to be
made.
Sets the printing mode that can fit
paper to the printable area equivalent
to 11 inches (66 lines).
Sets the height of a character.
SAME: The height stays the same
regardless of CPI.
DIFF: The height varies according to
CPI.
- 337 -
Item Factory default setting
Disable
No overwrite
2 hours
Disable
OFF
9. Operating Management/ Specifications
Description
Set whether to verify a job before
printing.
If enabled, the machine verifies that
the job is not altered before starting
printing. The security is enhanced,
however it will take longer to start
printing.
Set how to delete a job.
You can overwrite deleted data so that
it will not be restored.
If enabled, it will take longer to delete.
Available value: No overwrite/Zero out
once
Set the storage period of jobs.
If the set period elapses after jobs are
stored, the jobs will be automatically
deleted.
Available value:
15 minutes/30 minutes/1 hour/
2 hours/4 hours/8 hours/12 hours/1
day/2 days/3 days/4 days/5 days/6
days/7 days
Sets whether to save a restricted print
job.
If [Private Print Only] is selected, print
jobs other than private print are not
accepted.
Sets whether to verify a job password
when the access control is enabled.