Using Actkey - Oki MC573 Advanced Manual

Using ActKey

If you use ActKey, you can start scanning according to the settings you specified just by
clicking the button.
ActKey and scanner driver are included in the software DVD-ROM, and will be automatically
installed if [Install Optional Software] is selected when installing the software.
Starting Scanning on a Device (ActKey)
1
Press [Scan] or (Scan).
2
Set a document in the ADF or on the document glass.
3
Press [Scan To Computer].
4
Press [Select A Connecting PC].
5
Press [From Network] or [From USB Interface] in accordance with the
connection method of the machine and computer.
6
For the network connection, select a destination computer to which the data is
sent.
If the target computer is not listed in the destination computers, register the computer with Network Configuration.
Registering the Machine (New Device) to a Computer Using Network Configuration
7
Press [Select An Application].
• If you select [Application], the application that you specify [Application-1] of ActKey or dedicated application for
Windows starts, and then the scanned image is displayed on the application.
• If you select [Folder], the scanned document is saved in the specified folder.
• If you select [PC-FAX], a fax transmission application starts. After sending the scanned document, send a fax
with the fax transmission application on your computer.
8
Select the destination.
9
Press (START).
If the machine is connected via USB and ActKey does not start on the computer even when
the (START) button is pressed, follow the steps to start ActKey.
1
Click [Start], and then select [Devices and Printers].
2
Right-click [OKI MC573], and then [Scan properties].
If the [User Account Control] dialog box is displayed, click [Yes].
3
Click the [Events] tab.
4
Select an event from [Select an event].
5
Select [Start this program], and then select [ActKey].
6
Repeat steps 4 and 5 so that all events are set to [ActKey].
7
Click [OK].
Starting Scanning from a Computer (Remote Scan) (ActKey)
1
Set a document in the ADF or on the document glass.
2
If PC Scan Mode is set to [Manual Scan Mode] or [Secure Scan Mode], press
[Remote Scan TWAIN] on the touch panel to make the machine standby.
- 92 -
3. Scan