Copy Problems; The Copied Output Is Different From The Original - Oki MC573 Advanced Manual

Copy Problems

This section describes problems with the copy function.
If you cannot solve a problem with the following solutions, contact your dealer.
• Unable to Copy (User's Manual)

• The Copied Output is Different from the Original

• Other Problems (Copy)
The Copied Output is Different from the Original
• The copied output is different from the original document.
Point to check
Is [Duplex Copy] set?
Is [Mixed Size] set to [ON]?
• The size of the copied output is different from the size of the original
document.
Point to check
Is the proper size paper for the
document loaded in the paper tray?
Is the zoom rate properly set?
Is [Repeat] enabled?
• A part of the document image is missing on the copied output.
Point to check
Is [Edge Erase] set to [ON]?
Is [Margin] set to [ON]?
Is [N-in-1] enabled?
• Color documents are copied in black and white.
Point to check
Is color selection set to [Auto]?
The following documents may be
copied in black and white.
• Documents with extremely small
colored part
• Dark-colored documents
• Pale documents
- 275 -
Solution
Set [Duplex Copy] to [OFF(Simplex)].
Copying on Both Sides of Paper
(Duplex Copy)
Set [Mixed Size] to [OFF].
Copying Different Size
Documents (Mixed Size)
Solution
Load the proper size paper for the
Loading Paper (User's Manual)
document.
Set the proper zoom rate.
Making Enlarged or Reduced
Copies (Zoom)
Set [Repeat] to [OFF].
Making Multiple Copies on a
Sheet of Paper (Repeat)
Solution
Set [Edge Erase] to [OFF].
Erasing Edge Shadows (Edge
Erase)
Set [Margin] to [OFF].
Setting Margins (Margin)
Set [N-in-1] to [OFF].
Combining Multiple Pages on
One Sheet of Paper (N-in-1)
Solution
Set the color selection to [Color].
Switching Color Modes
You can change the criteria for
Scanner Setup
determining color document and
black and white document from [Auto
Color Judge Level].
7. Troubleshooting
Reference
Reference
Reference
Reference