Setting The Number Of Redial Attempts And Redial Intervals - Oki MC573 Advanced Manual

Setting the Number of Redial Attempts and Redial Intervals

If the fax transmission fails, the machine automatically redials. If the recipient's line is busy,
the recipient's machine does not answer, or a communication error occurs, the sender's
machine also automatically redials. You can set the number of redial attempts and the
intervals of redial attempts.
1
Press [Device Settings] on the touch panel.
2
Press or several times and press [Admin Setup].
3
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "999999"
respectively.
4
Press [Fax Setup].
5
Press [Other Settings].
6
Press [Redial Tries].
7
Enter the number of redial tries.
8
Press [OK].
9
Press [Redial Interval].
10
Enter the redial interval.
11
Press [OK].
12
Press [Back] until the home screen is displayed.
If the transmission failed a specified number of times for redial attempts, the document that is stored in memory is
erased and an error message is printed out.
Specifying a Destination from Transmission History and Reception History
- 202 -
5. Fax