Replacing A Him; Replacing A Mim - HP FlexNetwork HSR6802 Installation Manual

Figure 49 Pulling the FIP module out of the slot
4. Install a new FIP module. For the installation procedure, see
If you do not install a new FIP module in the slot, install a filler panel.

Replacing a HIM

1. Face the front of the router and locate the HIM to be removed.
2. Use a Phillips screwdriver to completely loosen the captive screws of the HIM.
3. Holding the two ejector levers with both hands, pull the ejector levers outward, and gently pull
the HIM out of the slot along the slide rails.
Figure 50 Pulling the HIM out of the slot
4. Install a new HIM. For the installation procedure, see
If you do not install a new HIM in the slot, install a filler panel.

Replacing a MIM

1. Face the front of the router and locate the MIM to be removed.
2. Use a flat-blade screwdriver to completely loosen the captive screws of the MIM.
3. Holding the handle of the MIM, gently pull the MIM out of slot along the slide rails.
"Installing a
44
"Installing an LPU."
HIM."