Red Power Led Is On; Fan Failures; Fan Tray Is Absent; Alm Led Is Red - HP FlexNetwork HSR6802 Installation Manual

Red power LED is on

Symptom
The router cannot be powered on and the red power LED on the front panel is on.
Solution
To resolve the problem::
1. Turn off the power switch, and verify that the power supply is firmly seated.
2. Verify that the power source meets the requirements of the router.
3. If the problem persists, contact Hewlett Packard Enterprise Support.

Fan failures

Fan tray is absent

Symptom
After the router is booted, the output from the configuration terminal shows that the fan tray is not in
position.
#Jun 14 11:57:27:778 2012 HPE DEVM/1/FAN STATE CHANGES TO FAILURE:
Trap 1.3.6.1.4.1.25506.8.35.12.1.6: fan ID is 1
%Jun 14 11:57:27:779 2012 HPE DEVM/3/FAN_ABSENT: Fan 1 is absent.
Solution
To resolve the problem::
1. Verify that the fan tray is in position.
2. Verify that the fan tray is in firm contact with the backplane of the router chassis.
3. If the problem persists, contact Hewlett Packard Enterprise Support.

ALM LED is red

Symptom
When the router is running, the ALM LED on the fan tray panel might turn red, and the output from
the configuration terminal shows that fan 1 is faulty.
%Jun 14 11:26:56:869 2012 HPE DRVMSG/3/FanErr: Fan 1 Error.
#Jun 14 11:26:57:579 2012 HPE DEVM/1/FAN STATE CHANGES TO FAILURE:
Trap 1.3.6.1.4.1.25506.8.35.12.1.6: fan ID is 1
%Jun 14 11:26:57:579 2012 HPE DEVM/2/FAN_FAILED: Fan 1 failed.
Solution
To resolve the problem:
1. Verify that no foreign object has entered the fan tray.
2. If the problem persists, contact Hewlett Packard Enterprise Support.
64