Replacing A Memory Module; Memory Module Structure - HP FlexNetwork HSR6802 Installation Manual

Figure 58 Removing the air filter
3. Install a new air filter. For the installation procedure, see

Replacing a memory module

CAUTION:
For the router to operate correctly, use the memory modules provided by Hewlett Packard
Enterprise only.
The MPUs and LPUs are equipped with memory modules. Before you install or remove a memory
module, remove the MPU or LPU from the chassis first. For more information, see
MPU and a switching fabric
For the memory module specifications, see

Memory module structure

Figure 59 Memory module structure (DDR2)
(1) Connector edge
(3) Latch notch
module" and
1 2
(a) Front view
1 2
(b) Rear view
"Installing an air filter on an
"Replacing an LPU."
"Appendix A Chassis views and technical
3
3
(2) Polarization notch
49
HSR6808."
"Replacing an
specifications."